- Metalkapsler
- Rester af bånd.
- Nitter
- Sikkerhedsnåle.
Bank kapslen flad med en hammer mod et fast underlag.
Slå et hul i kapslens centrum ved hjælp af et kraftigt søm.
Hullet skal have en størrelse, så nitten kan gå igennem.
Fold båndet og klip et hul gennem alle lag med en hultang.
Saml medaljen i en svingpresse med det rette værktøj, først
nittens underside, så det foldede bånd, kapslen og nittens overside.
Til sidst trækkes delene fast sammen i svingpressen.
Sy en sikkerhedsnål fast på bagsiden, så er medaljen klar til uddeling.
Cut notches in the capsule with a shears or wire cutters.
Bank capsule flat with a mallet against a firm surface.
Punch a hole in the capsule center using a sharp nail.
The hole must be sized so rivet can go through.
Fold the ribbon and cut a hole through all layers with a tool.
Collect the medal in a swing press with the right tool, first
the underside, then the folded strip, capsule and nittens surface.
Now pull the parts firmly together in the swing press.
Sew a safety pin onto the back and the medal is ready for distribution.
Made
your own medal
You need:
Beer or soda capsules (metal)
remains of ribbons
rivets
safety pins
rivets
safety pins
swing press
Cut notches in the capsule with a shears or wire cutters.
Bank capsule flat with a mallet against a firm surface.
Punch a hole in the capsule center using a sharp nail.
The hole must be sized so rivet can go through.
Fold the ribbon and cut a hole through all layers with a tool.
Collect the medal in a swing press with the right tool, first
the underside, then the folded strip, capsule and nittens surface.
Now pull the parts firmly together in the swing press.
Sew a safety pin onto the back and the medal is ready for distribution.
Ingen kommentarer:
Send en kommentar